We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
MDF - Radio Interfaces
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
-
idataLink Maestro HRN-AV-GM5 Rear Seat Entertainment System Audio Video input harness for 2008 - 2017 Buick, Cadillac, Chevrolet, GMC, Hummer and Saturn Vehicles$42.99- Fits select 2008 - 2017 Buick, Cadillac, Chevrolet, GMC, Hummer and Saturn Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Allows the installation of an aftermarket car stereo touchscreen receiver and retain OEM Rear audio video system
-
Pac LCGM52 Radio Replacement Interface for 2016-2017 Select GM(R) Trucks with 7" Display$42.99- Pac LCGM52 Radio Replacement Interface for 2016-2017 Select GM(R) Trucks with 7" Display
- Wiring Interfaces
-
Pac LCGM29 Radio Replacement Interface for Select Nonamplified GM(R) Vehicles (29-Bit, 14 & 16 Pin)$43.99- Pac LCGM29 Radio Replacement Interface for Select Nonamplified GM(R) Vehicles (29-Bit, 14 & 16 Pin)
- Wiring Interfaces
-
Axxess AX-GMLAN29 2006 - and Up GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$49.99Out of stock- Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Requires external steering wheel controller
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Designed for non-amplified models, analog amplified models, or when bypassing a factory amp
-
Axxess AX-GMLAN11 2006 - 2012 GM radio replacement interface with navigation outputs$51.99- Chevrolet, Pontiac, Saturn complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Metra XSVI-1731-NAV 2016 - and Up Honda Civic Radio interface with Navigation outputs$55.99Out of stock- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2016 - and Up Honda vehicles
- Provides accessory output
- Retains the factory backup camera
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
-
Pac LCCH11 Radio Replacement Adapter for Chrysler(R) (LCCH11 2005-2010 Dodge(R) Chrysler(R) Jeep(R))$58.99- Pac LCCH11 Radio Replacement Adapter for Chrysler(R) (LCCH11 2005-2010 Dodge(R) Chrysler(R) Jeep(R))
- Wiring Interfaces
-
Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
-
Axxess AX-GMLAN112 2006 - 2012 GM radio replacement LAN-BUS interface with navigation outputs$60.99- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
-
Metra XSVI-6515-NAV 2012 - 2015 Fiat 500 Radio interface with Navigation outputs$62.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2012 - 2015 Fiat 500 vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with both amplified and non-amplified audio systems
-
idataLink Maestro HRN-RR-TO2 Radio Replacement and Steering Wheel Interface Harness for 2012 - 2018 Toyota Vehicles$64.99- Fits select 2012 - 2018 Toyota Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
-
Axxess AX-MB1 2001 - and Up Mercedes Benz radio replacement interface with navigation outputs$64.99Out of stock- Mercedes complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models or when bypassing a factory amplifier
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Metra XSVI-6522-NAV 2007 - and Up Chrysler CAN Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2007 - and Up Can-Bus Chrysler vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
-
Metra XSVI-6502-NAV 2004 - 2010 Chrysler Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2004 - 2010 Chrylser vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Provides steering wheel interface outputs
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog