We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Radio Interfaces
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
-
Metra AXDI-GM3 Economy Data Bus interface with Chime Retention Speaker for 1996 - 2005 Cadillac vehicles$89.99- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Used in models without OnStar or when not retaining OnStar
- Retains all factory warning chimes with built in speaker
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- For select Cadillac vehicles
-
Axxess AXDI-VET1 Car Stereo replacement interface for 1997 - 2004 Corvette with factory Amplifier$105.99- Easily replace the factory radio in 1997 - 2004 Corvette with factory amplifier
- Retains door woofers
- Provides all connections to factory wiring
- USB firmware updatable
-
Axxess AX-MB1-SWC 2001 - and Up Mercedes Benz radio replacement interface with steering wheel and navigation outputs$110.99Out of stock- Mercedes complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models or when bypassing a factory amplifier
- Built in steering wheel control interface
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess VWTO-01 Fender System Accessory and NAV Output CAN Interface for Volkswagen 2011-Up$111.99- Provides RAP , navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- Perfect for use with car stereos featuring non-amplified systems or when replacing amplified systems
- Includes ASWC-1 connector
- 12 volt 10 amp car accessory
- USB device can also connected
-
Axxess AX-VW903 2008 - 2016 Volkswagen radio replacement interface with steering wheel, navigation outputs and display retention$111.99Out of stock- Provides RAP , navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- Perfect for use with car stereos featuring non-amplified systems or when replacing amplified systems
- Includes ASWC-1 connector
- 12 volt 10 amp car accessory
- USB device can also connected
-
Axxess AXDI-SP1 2007 - 2013 Sprinter Van Data Bus interface with Navigation outputs$119.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Prewired for ASWC steering wheel interface
-
Axxess AX-MAZ1-SWC Mazda radio replacement interface with steering wheel and navigation outputs$120.99- Mazda complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Designed for amplified and non-amplified models, or when bypassing a factory amp
- Built in steering wheel control interface
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess AX-GMLAN11-SWC 2006 - 2009 GM radio replacement interface with steering wheel and navigation outputs - (Non-Amplified Audio)$123.99- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for amplified and non-amplified audio systems
-
Axxess AX-TYAMP2-SWC 2012 - and Up Toyota radio replacement interface with steering wheel and navigation outputs - (Amplified Audio)$123.99- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides reverse gear outputs
- Retains the factory AUX-IN jack
- Interface is designed for amplified audio systems
-
Axxess AX-ADBOX2 Auto Detect Radio Replacement Interface Control Box$124.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess AX-AU12-SWC 2002 - 2013 Audi radio replacement interface with steering wheel and navigation outputs$129.99Out of stock- Audi complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and Bose amplified models
- Pre-wired for steering wheel control
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess GMOS-LAN-08 OnStar Interface for 2012 - 2016 Cadillac, Chevrolet and GMC Vehicles$129.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess AX-FD1-SWC 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$130.99- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
-
Axxess AX-ADBOX1 Auto Detect Radio Replacement Interface Control Box$139.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess AX-FD2-SWC 2011 - and Up Ford radio replacement interface with steering wheel and navigation outputs$139.99- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains SYNC audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for non-amplified audio systems
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog