Radio Interfaces
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
- Pac LCCH11 Radio Replacement Adapter for Chrysler(R) (LCCH11 2005-2010 Dodge(R) Chrysler(R) Jeep(R))$58.99
- Pac LCCH11 Radio Replacement Adapter for Chrysler(R) (LCCH11 2005-2010 Dodge(R) Chrysler(R) Jeep(R))
- Wiring Interfaces
- Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Axxess AX-GMLAN112 2006 - 2012 GM radio replacement LAN-BUS interface with navigation outputs$60.99
- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Metra XSVI-6515-NAV 2012 - 2015 Fiat 500 Radio interface with Navigation outputs$62.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2012 - 2015 Fiat 500 vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with both amplified and non-amplified audio systems
- Axxess AX-MB1 2001 - and Up Mercedes Benz radio replacement interface with navigation outputs$64.99Out of stock
- Mercedes complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models or when bypassing a factory amplifier
- Provides NAV outputs (parking brake, reverse, and speed sense)
- idataLink Maestro HRN-RR-TO2 Radio Replacement and Steering Wheel Interface Harness for 2012 - 2018 Toyota Vehicles$64.99
- Fits select 2012 - 2018 Toyota Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra LC-BMRC-01 Car Stereo Interface for 2006 - 2015 select BMW and Mini vehicles with chime retention speaker$65.99
- Provides accessory output form databus signals (12-volt 10-amp)
- Retains R.A.P. (Retained Accessory Power), if equipped so radio stays on as long as doors stay closed
- Used in non-amplified systems or when replacing amplified systems
- Retains all warning chimes through onboard speaker
- Provides all necessary outputs for an aftermarket car stereo to connect to a databus equipped vehicle
- Axxess XSVI-1784-NAV 2007 - 2013 Sprinter Van Data Bus interface with Navigation outputs$65.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Prewired for ASWC steering wheel interface
- Metra XSVI-6522-NAV 2007 - and Up Chrysler CAN Bus interface with Navigation outputs$65.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2007 - and Up Can-Bus Chrysler vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Metra XSVI-6502-NAV 2004 - 2010 Chrysler Data Bus interface with Navigation outputs$65.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2004 - 2010 Chrylser vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Provides steering wheel interface outputs
- Metra XSVI-5520-NAV Car Stereo Interface harness and control box for 2006 - and Up Ford with Navigation$65.99
- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony/ THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Includes a prewired ASWC-1 connector
- Metra XSVI-2105-NAV 2006 - and Up GM LAN Bus interface with Navigation outputs$65.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - and Up LAN-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Pre-wired for ASWC steering wheel interface
- Metra XSVI-2104-NAV 2006 - 2012 General Motors GM-LAN Data Bus interface with Navigation outputs$65.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - 2012 GM-LAN Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Metra XSVI-2103-NAV 2004 - 2008 GM LAN Data Bus interface with Navigation outputs$65.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Does not retain factory warning chimes
- Not for vehicles with OnStar
- Metra XSVI-2003-NAV 2005 - and Up GM Class-2 Data Bus interface with Navigation outputs$65.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2005 - and Up Class-2 Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Pre-wired for ASWC steering wheel interface control