Replace Factory Radio - 2016 - Axxess - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- Axxess AX-GMLAN29 2006 - and Up GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$49.99Out of stock
- Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Requires external steering wheel controller
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Designed for non-amplified models, analog amplified models, or when bypassing a factory amp
- Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Axxess AX-HYKIA-SPDIF 2012 - 2016 Hyundai / Kia radio replacement SPDIF Digital audio input adapter$73.99
- Hyundai / Kia SPDIF input adapter for plug-and-play installation of an aftermarket car radio
- Must be used with AX-HYKIA1-SWC or AX-HYKIA2-SWC
- Used in amplified models only
- Axxess AX-TYAMP1-SWC 2003 - and Up Toyota radio replacement interface with steering wheel and navigation outputs$118.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Built in steering wheel interface controller
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in amplified audio systems
- Axxess AX-TYAMP2-SWC 2012 - and Up Toyota radio replacement interface with steering wheel and navigation outputs - (Amplified Audio)$123.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides reverse gear outputs
- Retains the factory AUX-IN jack
- Interface is designed for amplified audio systems
- Axxess AX-HYKIA2-SWC 2012 - 2016 Hyundai Veloster radio replacement interface with steering wheel and navigation outputs$129.99
- Hyundai Veloster complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Axxess AX-GMLAN44-SWC 2012 - 2016 GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$139.99
- Cadillac, Chevrolet, GMC complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Axxess AX-HYKIA1-SWC 2012 - 2016 Hyundai / Kia radio replacement with steering wheel and navigation outputs$139.99
- Hyundai / Kia complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Axxess AXTC-FD2 2012 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$149.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the 3.5mm AUX-IN jack
- Includes 5v factory amplifier step-down
- Axxess GMOS-MOST-02 2014 - and Up Chevrolet radio replacement MOST-BUS interface with steering wheel and navigation outputs$299.99Out of stock
- 2014 - and Up Chevrolet Corvette and Impala radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified MOST-BUS audio systems
- Axxess GMOS-045 OnStar Interface for 2011 - 2016 Chevrolet Cruze$330.99Out of stock
- For 2011 - 2016 Chevrolet Cruze vehicles
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Retains R.A.P. (retained accessory power)
- Provides NAV outputs (parking brake, reverse, mute, and speed sense)
- Retains all factory warning chimes with built in speaker