Ford Wiring Harness
-
Axxess AX-TFR1 T-Harness for Select Ford 2010-14 Vehicles$35.99- Provides tight and secure connection
- Durable and reliable
-
idataLink Maestro HRN-RR-F02 Radio Replacement and Steering Wheel Interface Harness for 2011 - 2018 Ford Vehicles$36.99- Fits select 2011 - 2018 Ford Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
-
Metra 71-5700 Sound Wiring Harness for Select Ford 1998-Up Vehicles$38.99- Delivers premium sound quality
- Perfect to repair harness where the plugs have been damaged or cut off
- Compatible with factory-installed radios
- Ensures a secure and reliable fit
-
Metra 71-5520-1 TurboWires Wiring Harness Ford, Lincoln and Mercury 2003-2007 Vehicles Connection Harness$38.99- The 71-series harnesses are designed to plug into the factory radio. Can be used to repair a harness where the plugs have been cut off or damaged.
- Connection Harness Plugs into OEM Radio
- Power and 4-Speaker connections
- One 24-pin plug for power and speaker connector
- One 16-pin plug for Premium sound equipped vehicles
- One 8-pin plug for charger and auxiliary
-
Axxess AX-ADFD02 Harness for 2011 - and Up Ford Vehicles$45.99- Facilitates the installation of the AX-ADBOX1 or ADBOX2 interface box in select Ford vehicles
- Easy plug-and-play installation to an aftermarket car stereo
- Provides navigation outputs like reverse, parking brake, VSS
- Includes a pre-wired ASWC-1 steering wheel interface connector
- Color coded wires for easy installation
-
Axxess LOC-FDH2 Plug-and-Play Line Output Converter Harness for 2011 - 2020 Ford vehicles$49.99- Fits 2011 - 2020 Ford vehicles with factory audio systems
- Designed to work with Axxess LOCs, and is versatile enough to be compatible with most sound processors, line output converters, and amplifiers with high-level inputs
- Provides (4) Channel Speaker level outputs
- T-harness provides convenient access to the speaker-level output signals from your factory radio
- It provides signal connections for your system, including constant 12-volt (10-amp fuse), ground, and remote turn-on leads
-
Axxess AX-ADXSVI Car stereo replacement interface box$52.99Out of stock- Provides RAP (Retained Accessory Power), navigation outputs and high level speaker input
- Ideal for car stereos without any amplified system or when one is replacing the installed amplified system
- Includes a prewired ASWC-1 connector
- 12 volt 10 amp car accessory
- Allows the user to connect a USB device
-
idataLink Maestro HRN-RR-F01 Radio Replacement and Steering Wheel Interface Harness for 2006 - 2016 Ford, Lincoln, Mazda, and Mercury Vehicles$59.99- Fits select 2006 - 2016 Ford, Lincoln, Mazda, and Mercury Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
-
Metra XSVI-5521-NAV Car Stereo Interface harness for 2007 - and Up Ford with Factory Subwoofer$70.99- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony / THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Low level subwoofer connections
- Includes a prewired ASWC-1 connector
-
Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
-
idataLink Maestro HRN-HRR-FO2 Radio Replacement and Steering Wheel Interface Harness for 2011 - 2018 Ford Vehicles$72.99- Fits select 2011 - 2018 Ford Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
-
Metra XSVI-5524-NAV 2011 - and Up Ford Radio interface with Navigation outputs$81.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2011 - and Up Ford vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with factory non-amplified audio systems
-
Axxess AX-LCD LCD Display for Retaining Personalization Menu in Select Vehicles$89.99- Retains the personalization menu that is lost when removing the factory radio in select applications
- Micro “B” USB updatable
- Wiring Harness ensures convenient and secure connection
- Adjustable LCD screen with 256 colors
- Wire channel for flexible mounting
-
Axxess AX-FD1-SWC 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$130.99- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
-
Axxess AXTC-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$139.99- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog