Replace Factory Radio - Retain OEM Subwoofer - Speaker Replacement - Ford Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM subwoofer for your bass notes. Subwoofer retention harnesses make this very easy with a simple plug and play connector so you don't have to splice signal wires to aftermarket connectors that your new aftermarket radio can use to send the audio signals to the factory subwoofer.
Easily replace your factory speakers without cutting a single factory wire. Speaker replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory speaker cables.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM subwoofer for your bass notes. Subwoofer retention harnesses make this very easy with a simple plug and play connector so you don't have to splice signal wires to aftermarket connectors that your new aftermarket radio can use to send the audio signals to the factory subwoofer.
Easily replace your factory speakers without cutting a single factory wire. Speaker replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory speaker cables.
Shop By
- idataLink Maestro HRN-RR-F01 Radio Replacement and Steering Wheel Interface Harness for 2006 - 2016 Ford, Lincoln, Mazda, and Mercury Vehicles$59.99
- Fits select 2006 - 2016 Ford, Lincoln, Mazda, and Mercury Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra XSVI-5521-NAV Car Stereo Interface harness for 2007 - and Up Ford with Factory Subwoofer$70.99
- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony / THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Low level subwoofer connections
- Includes a prewired ASWC-1 connector
- Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- idataLink Maestro HRN-HRR-FO2 Radio Replacement and Steering Wheel Interface Harness for 2011 - 2018 Ford Vehicles$72.99
- Fits select 2011 - 2018 Ford Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra XSVI-5524-NAV 2011 - and Up Ford Radio interface with Navigation outputs$81.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2011 - and Up Ford vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with factory non-amplified audio systems
- Axxess AX-FD1-SWC 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$130.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Axxess AX-FD2-SWC 2011 - and Up Ford radio replacement interface with steering wheel and navigation outputs$139.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains SYNC audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for non-amplified audio systems
- Axxess AXTC-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$139.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Metra AFSI-02 Ford SYNC Retention Interface with Navigation Output Wires without display$147.99
- Complete car stereo integration harness for Non-Amplified audio systems
- Provides 12 volt 10 amp car accessory
- Provides RAP (Retained Accessory Power)
- High level speaker inputs for connections to factory speakers
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Retains OEM Bluetooth system
- Axxess AXTC-FD2 2012 - and Up Ford radio replacement CAN-BUS interface with steering wheel and navigation outputs$149.99
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Integrated steering wheel control interface for direct plug in to aftermarket radio
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the 3.5mm AUX-IN jack
- Includes 5v factory amplifier step-down