Planet Audio BB4.1200 Big Bang 1200W 4-Channel Full Range Class-D Amplifier
Expert Knowledge
Talk to a specialist
- Class-D 4-Channel Amplifier
- 2-ohm Stereo and 4-ohm Bridged Impedance Stability
- 225W x 4 @ 2Ω
- 113W x 4 @ 4Ω
- 450W x 2 (Bridged) @ 4Ω
Planet Audio MB300.4D MINI BANG 1200W 4-Channel Full Range Class-D Amplifier
-
Features:
- Class-D 4-Channel Amplifier
- Amplifier will operate with 4-ohm or 2-ohm loads
- Pulse Width Modulated MOSFET power supply
- LED power (green) and protect (red) indicators
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heat-sink
- 4/3/2 or Mono channel operation
- Preamp RCA outputs to daisy chain multiple amps
- Two sets of RCA Inputs
- Pre-Amp features:
- Variable high-pass filter: 50 - 250 Hz, 24 dB/octave
- Variable low-pass filter: 50 - 250 Hz, 24 dB/octave
- Variable Bass Boost: 0 to +12 dB bass boost at 50 Hz
- Specs:
- Frequency Response: 20 - 20,000 Hz
- Total Harmonic Distortion (THD): 0.04%
- Signal to Noise Ratio: 90 dB
- Max Power Output:
- Total Power Output: 1200W
-
RMS Power Output:
- 225W x 4 @ 2Ω
- 113W x 4 @ 4Ω
- 450W x 2 (Bridged) @ 4Ω
-
Dimensions:
- Overall Dimensions: 2.7 inch (H) x 8.78 inch (L) x 6.9 inch (W)
| Manufacturer | Planet Audio |
|---|---|
| Part Number | BB4.1200 |
| Amplifier Topology Class | Class D |
| Number of Channels | 4 Channel |
| Total RMS Power at 2 ohm | 225.00 |
| Total RMS Power at 4 ohm | 113.00 |
| RMS Output per Channel (x4 at 4 ohms) | 113.00 Watts |
| Amplifier Bridging | Bridgable @ 4 ohms |
| Minimum Impedance in Bridged Mode | 4 ohm |
| Minimum Impedance in Un-Bridged Mode | 2 ohm |
| Strappable Amplifier | No |
| RCA Pre-amp Audio inputs | 2 Pairs (Front, Rear) |
| RCA Pre-amp Audio outputs | 1 Pair |
| Gain Control | Yes |
| Bass Knob / Remote Gain | Yes |
| Built in Crossover | High-pass, Low-pass |
| Cooling Fan | No |
| Color | Black |
| Warranty | 1 Year |
| CEA2006 Compliant | No |
| UPC Code | 636210600206 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
