Kenwood KAC-D3104 600 Watt Class D 4-Channel Power Amplifier
Expert Knowledge
Talk to a specialist
- 600 Watt Class D 4-Channel Amplifier
- 4-ohm / 2-ohm stable
- 50W x 4 @ 4 Ω
- 75W x 4 @ 2 Ω
- 150W x 2 (bridged)
- Signal sensing turn on
Kenwood KAC-D3104 600 Watt Class D 4-Channel Power Amplifier
-
Features:
- 1600 Watt Class D 5-Channel Amplifier
- Amplifier will operate with 2 ohm or 4 ohm loads
- 200mV-5V High Speaker Level or Low Level RCA Inputs
- Extruded aluminum heat sink design
- Speaker Level Input for easy integration to factory audio systems
- Signal Sensing Turn-on for easy integration to factory audio systems
- 4 Gauge power wire recommended
- Fuse - 20A x 2
-
Pre-Amp features:
- Frequency Response - 20Hz - 50kHz
- Signal to Noise Ratio - >80dB
- Gain Adjust - 200mV - 5V
- Speaker Level Gain Adjust - 4V - 12V
- Total Harmonic Distortion - 1.0%
- Variable Low-pass Crossover Frequency - 50Hz - 200Hz
- Variable Low-pass Crossover Slope - (dB/oct): 24dB/octave
- Variable Bass Boost @ 40Hz (0 - 18 dB)
-
Inputs and Outputs:
- 4-channel or 2-Channel operation
- 2 Pair RCA low level inputs
-
Max Power Output:
- Total Power Output: 600 Watts
-
RMS Power Output:
- 50W x 4 @ 4 Ω
- 75W x 4 @ 2 Ω
- 150W x 2 (bridged)
-
Dimensions:
- Overall Dimensions: 2-3/16 inch (H) x 7-3/8 inch (L) x 6-11/16 inch (W)
| Manufacturer | Kenwood |
|---|---|
| Part Number | KAC-D3104 |
| Amplifier Topology Class | Class D |
| Number of Channels | 4 Channel |
| RMS Output per Channel (x2 at 4 ohms) | 75.00 Watts |
| RMS Output per Channel (x4 at 4 ohms) | 50.00 Watts |
| Total Peak Power Output | 600.00 (Watts) |
| Strappable Amplifier | No |
| RCA Pre-amp Audio inputs | 2 Pairs (Front, Rear) |
| Built in Crossover | High-pass, Low-pass |
| Cooling Fan | No |
| Color | Silver |
| Warranty | 1 Year |
| Recommended Power Wire Gauge | 4 Gauge |
| Overall Height | 2.28 inches |
| Overall Length | 7.40 inches |
| Overall Width | 6.70 inches |
| CEA2006 Compliant | No |
| UPC Code | 0019048226310 |
| Return period | 30 days |
| Exchange period | 30 days |
Car amplifier installation
We show you the complete process of installing a Pioneer Double DIN car stereo in a Chevy truck. The in-depth video shows the installation of the interface, and steering wheel control.
Amplifier Installation basics
Let's start with the basics of adding or installing a car amplifier. First you will need to plan your installation and power wiring, this usually is the most difficult part of the installation for most.
How to choose the proper wire size explained
What size power wire do I need for my amplifier? Well, that depends on the length of the wire and the power consumption of the amplifier. We walk you through how to choose the right gauge wire and wire material depending on your amplifier installation requirements.
How to wire speakers and subwoofers to your new amplifier
In our third video we demonstrate the various ways you can wire speakers and amplifiers to all types of amplifiers. There different ways to do this depending on the type of amplifier you choose to purchase.
What is gain? How do I set it properly?
In our fourth video we demonstrate how to set the gains on your amplifier to prevent damage to your speakers, subwoofers and even possibly your new amplifier. Using a portable oscilloscope we show you how to set your gains.
