We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
5/8 inch - Radio Interfaces
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
-
Metra XSVI-5520-NAV Car Stereo Interface harness and control box for 2006 - and Up Ford with Navigation$65.99- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony/ THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Includes a prewired ASWC-1 connector
-
Metra XSVI-2105-NAV 2006 - and Up GM LAN Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - and Up LAN-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Pre-wired for ASWC steering wheel interface
-
Metra XSVI-2104-NAV 2006 - 2012 General Motors GM-LAN Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - 2012 GM-LAN Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
-
Metra XSVI-2003-NAV 2005 - and Up GM Class-2 Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2005 - and Up Class-2 Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Pre-wired for ASWC steering wheel interface control
-
Metra XSVI-9003-NAV 2002 - and Up Volkswagen CAN-Bus interface with Navigation outputs$66.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2002 - and Up Volkswagen CAN-Bus vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Interface will not work with Fender Audio systems
- Interface will work with Monsoon and Dynaudio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Pre-wired for ASWC steering wheel interface Learn More
-
DISCONTINUED - Metra AFDI-RSE-01 Ford / Lincoln / Mercury Can-Bus Rear seat entertainment system Interface$67.99Out of stock- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 207 - and Up Ford vehicles with factory rear seat entertainment systems
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Interface willl allow factory overhead DVD system to work with an aftermarket radio
- Provides rear seat audio output so that you can connect to Aux input on an aftermarket car stereo via RCA cables or 3.5mm jack
-
Metra XSVI-9006-NAV 2015 - and Up Volkswagen Golf / Jetta / Passat Radio interface with Navigation outputs$68.99Out of stock- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2015 - and Up Volkswagen vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with factory non-amplified audio systems
-
Metra LC-CHRC-01 Radio Replacement Data Bus interface with Chime Retention Speaker for 2013 and Up Dodge Ram pickup trucks$69.99Out of stock- Designed for 2013 and Up Dodge Ram pickup trucks
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains the 3.5mm AUX-IN jack
- Retains all factory warning chimes with built in speaker
-
Axxess AX-GMCL2 2000 - 2013 GM Radio Replacement Interface with navigation outputs$69.99- Fits 2000 - 2013 model years
- Complete General Motors radio replacement interface
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable
-
Metra XSVI-5521-NAV Car Stereo Interface harness for 2007 - and Up Ford with Factory Subwoofer$70.99- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony / THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Low level subwoofer connections
- Includes a prewired ASWC-1 connector
-
Metra USB-CAB Firmware Update Cable for Axxess interfaces$71.99- Easily update the firmware of all Axxess interfaces with the USB-CAB USB cable
- Continous updates are made available by Metra, with this cable it is very easy to update your interface
- Ensure continuous compatibility with your vehicle
-
Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
-
Metra TYTO-01 2001 and Up Lexus and Toyota amplified audio system interface$73.99- Integrates with JBL Toyota Audio systems
- Designed for Lexus audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
-
Axxess AX-HYKIA-SPDIF 2012 - 2016 Hyundai / Kia radio replacement SPDIF Digital audio input adapter$73.99- Hyundai / Kia SPDIF input adapter for plug-and-play installation of an aftermarket car radio
- Must be used with AX-HYKIA1-SWC or AX-HYKIA2-SWC
- Used in amplified models only
-
PAC C2R-CHYNA For Chrysler Vehicles with No Factory Amplifier$74.99PAC C2R-CHYNA For Chrysler Vehicles with No Factory Amplifier Learn More
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog